1500 PSIG STAINLESS STEEL HOUSINGS

  • Complete Removal Of Sub-Micron Contaminants
  • High Efficiency Coalescing
  • Completely Disposable
  • Suitable For Corrosive Applications
  • High Flow Rates, Low Pressure Drops
  • Custom Sizes Available
  • Suitable For Highly Absorbent Gases
  • Gas Or Liquid Service


1500 PSIG
1500 PSIG STAINLESS STEEL HOUSINGS
Our Microfiber disposable filter elements are manufactured from precise mixtures of borosilicate glass microfibers to the very highest standards. These elements offer exceptional filtration efficiency at very low-pressure drops and being +90% void volume give very long service life.

The elements are bonded to impart high strength and eliminate fiber shedding. The choice between the different binders available will depend upon the application. Each type of element is available in a wide range of efficiencies covering the complete range from coarse bulk contamination removal (grade 80) to essentially complete removal of sub-micron contaminates.

C Grade Elements are specifically designed for the removal of liquid aerosols and particulate from gases in both corrosive and non-corrosive applications.
RC Grade Elements are designed for high pressure coalescing applications. These elements consist of a borosilicate glass inner layer sandwiched between two, rayon/phenolic layers. The reinforced inner/outer layers provide excellent strength.


Stainless Steel In compressed air & gas service, the mesh stainless steel (SS) elements may be utilized as pre-coalescers or initial course filters in heavily contaminated systems. The SS elements may also be cleaned for reuse. Micron sizes available: 0.5, 1, 3, 10, 25, 50, 100, and 200.
     

PRINCIPLE SPECIFICATIONS

Housing Model w/ Drain

130

132

140

142

150

151

152

160

161

162

Housing Model w/o Drain

Housing Model w/ Glass Bowl

Port Size (NPT)

Drain Type (NPT)

Maximum Pressure (psig)

Max. Temp. – Viton (400°F)

Max. Temp. – PTFE (400°F)

Max. Temp. – Kalrez (600°F)

134

N/A

1/4”

1/4”

1500

GV130

GP130S

KZ130

136

N/A

1/2”

1/4”

1500

GV130

GP130S

KZ130

144

N/A

1/4”

1/4"

1500

GV130

GP130S

KZ130

146

N/A

1/2”

1/4"

1500

GV130

GP130S

KZ130

N/A

N/A

1”

1/4”

1500

GV150

GP150S

KZ150

N/A

N/A

1 1/2”

1/4”

1500

GV150

GP150S

KZ150

N/A

N/A

2”

1/4”

1500

GV150

GP150S

KZ150

N/A

N/A

1”

1/4”

1500

GV150

GP150S

KZ150

N/A

N/A

1 1/2”

1/4”

1500

GV150

GP150S

KZ150

N/A

N/A

2”

1/4”

1500

GV150

GP150S

KZ150

Principle Dimensions: (inches)

Center Of Port To Head

Head Diameter

Overall Length

Element Removal Clearance

 

0.59

2.36

4.80

2.95

 

0.59

2.36

4.80

2.95

 

0.59

2.36

9.29

7.40

 

0.59

2.36

9.29

7.40

 

1.50

4.52

14.75

9.05

 

1.85

4.52

15.58

9.05

 

1.85

4.52

15.58

9.05

 

1.50

4.52

24.50

17.87

 

1.85

4.52

25.12

17.87

 

1.85

4.52

25.12

17.87

Mounting Holes

<----------------M6 x 1/2” Deep on 1 1/2” centers----------------------->

<-------------------------------- M10 x 5/8” on 2½” Centers ------------------------------>

Filter Element Codes: (1)

Disposable Element

Stainless Steel Element

PEL Element

PTFE Element

 

25-64-□

SS-25-64-□

PEL-25-64-□

PT-25-64-□

 

25-64-□

SS-25-64-□

PEL-25-64-□

PT-25-64-□

 

25-178-□

SS-25-178-□

PEL-25-178-□

PT-25-178-□

 

25-178-□

SS-25-178-□

PEL-25-178-□

PT-25-178-□

 

51-230-□

SS-51-230-□

PEL-51-230-□

PT-51-230-□

 

51-230-□

SS-51-230-□

PEL-51-230-□

PT-51-230-□

 

51-230-□

SS-51-230-□

PEL-51-230-□

PT-51-230-□

 

51-476-□

SS-51-476-□

PEL-51-476-□

PT-51-476-□

 

51-476-□

SS-51-476-□

PEL-51-476-□

PT-51-476-□

 

51-476-□

SS-51-476-□

PEL-51-476-□

PT-51-476-□

Materials Of Construction: (2)

Head, Internals & Bowl

Seals

 

316LSS

Viton

 

316LSS

Viton

 

316LSS

Viton

 

316LSS

Viton

 

316LSS

Viton

 

316LSS

Viton

 

316LSS

Viton

 

316LSS

Viton

 

316LSS

Viton

 

316LSS

Viton

Accessories:

Support Core

Mounting Bracket

 

SC130