HEATABLE HOUSINGS

  • 316L Stainless Steel Construction
  • Specifically Designed For Hot Gas Analysis
  • Bayonet Type Construction For Quick Element Change
  • Integral Element Tie Rod And Retainer
Heatable Housings
HEATABLE HOUSINGS
Heatable housings are designed for hot gas analysis such as diesel exhaust and continuous emission monitoring systems. They may be used under vacuum to draw the sample or pressurized to 30 psig for blow down. We offer three basic models: H122S-TR, H130S-TR, and H140S-TR. Choose the correct housing based on the flow rate and response time.

The bayonet-type closure allows the element to be changed within seconds even at operating temperatures. An integral tie rod and retainer make element service a snap. The element is attached to the bayonet handle, thus completely removing it from the body.

 

PRINCIPLE SPECIFICATIONS

Side Port Housing Model

H122S-TR

H130S-TR

H140S-TR

H254S

Bottom Port Housing Model

N/A

H130-TR

H140-TR

N/A

Port Size (NPT)

Maximum Pressure  (psig)

Maximum Temperature (˚F) - Silicone

Maximum Temperature (˚F) - Viton

Maximum Temperature (˚F) - Kalrez

1/4”

30

450

400

600

1/4”

30

450

400

600

1/4”

30

450

400

600

1/2”

30

450

400

600

Principle Dimensions: (inches)

Diameter

Body Length

Element Removal

 

1.50

4.72

4.09

 

2.20

5.19

4.34

 

2.20

9.68

8.58

 

3.46

12.99

11.72

Filter Element Codes:

Disposable Element

 

12-57-□

 

25-64-□

 

25-178-□

 

51-254-□

Material of Construction:

Body & Internals (2)

Seals (1)

 

316LSS

Silicone

 

316LSS

Silicone

 

316LSS

Silicone

 

316LSS

Silicone

Internal Volume (cc)

55

100

240

1320

Notes:      (1) Viton seals are available as an option

(2) Material abbreviations: 316LSS= 316L Stainless Steel

 

 

Flow Rates

Air Flow Rates in SCFM at stated line pressure with 1.5 PSID

Model H122

Air Pressure (PSIG)

Element Grade

 

50S

60S

70S, 70S21-R

80S

1.5

15

30

1.5

2.7

4.0

3.0

5.5

8.4

3.6

6.5

10

4.0

7.7

11

Model H130

1.5

15

30

3.0

5.4

7.8

5.2

9.5

14

6.2

11

16

6.8

11

17

Model H140

1.5

15

30

5.6

10

14

6.8

12

18

7.4

13

19

8.0

14

21

Model H254

1.5

15

30

11.8

21

31.5

18.1

32.3

48.5

19.1

34

51

21

37.4

56.1

 

 

Home   |   Compressed Air and Gas   |   Analyzer Filters   |   Membrane Seperators   |   Liquid Filters   |   Vacuum Pump Filters   |   Contact Us

© 2008 United Filtration Systems, Inc. 6558 Diplomat Drive, Sterling Heights, MI 48314
T: (586) 802-5561      F: (586) 802-5562