Back to UFS
DISPOSABLE FILTER ELEMENTS

  • Complete Removal Of Sub-Micron Contaminants
  • High Efficiency Coalescing
  • Completely Disposable
  • Suitable For Corrosive Applications
  • High Flow Rates, Low Pressure Drops
  • Custom Sizes Available
  • Suitable For Highly Absorbent Gases
  • Gas Or Liquid Service


Disposable
DISPOSABLE FILTER ELEMENTS
Our Microfiber disposable filter elements are manufactured from precise mixtures of borosilicate glass microfibers to the very highest standards. These elements offer exceptional filtration efficiency at very low-pressure drops and being +90% void volume give very long service life.

The elements are bonded to impart high strength and eliminate fiber shedding. The choice between the different binders available will depend upon the application. Each type of element is available in a wide range of efficiencies covering the complete range from coarse bulk contamination removal (grade 80) to essentially complete removal of sub-micron contaminates.

C Grade Elements are specifically designed for the removal of liquid aerosols and particulate from gases in both corrosive and non-corrosive applications.
K Grade Elements are specified for particulate removal where corrosive gases and liquids are to be filtered as they have excellent chemical resistance. They are also used when highly reactive gases are being analyzed since they exhibit very low levels of adsorption.


CS Grade Elements are designed for high temperature coalescing applications good to 900°F. Excellent for heavy coalescing.
RC Grade Elements are designed for high pressure coalescing applications. These elements consist of a borosilicate glass inner layer sandwiched between two, rayon/phenolic layers. The reinforced inner/outer layers provide excellent strength.


S Grade Elements are completely organic and are used to filter particulate at temperatures from 300°F to 900°F. The S21-R Type are used in diesel emission applications.
ET Grade Elements are hydrocarbon-free filters developed to remove particulate for automotive emission testing up to 400°F.


Standard Grade Elements are suitable for all particulate removal applications in non-corrosive gases and liquids. The coarsest grade that will adequately protect the application should be chosen as this will result in the most economical solution to the contamination problem.
L Grade Elements have a hydrophobic binder, making them ideal for applications where sterilization is required.

PRINCIPLE SPECIFICATIONS

Element Grade

Binder Type

Maximum

Temperature (°F)

Grade designations, removal of 0.01 micron particles or particles and aerosols

99.99998%

+99.9999%

+99.99%

+99.5%

+95%

+75%

C Grade

PVDF Fluorocarbon Resin

300

30C

40C

50C

60C

70C

80C

K Grade

PVDF Fluorocarbon Resin

300

30K

40K

50K

60K

70K

80K

CS Grade

Silica Inorganic Resin

900

30CS

40CS

50CS

60CS

70CS

80CS

RC Grade

Phenolic Resin

250

N/A

N/A

RC1

N/A

RC

N/A

S Grade

S21-R Grade

Silica Inorganic Resin

900

30S

40S

50S

60S

70S

80S

ET Grade

PVDF Proprietary

400

30ET

40ET

50ET

60ET

70ET

80ET

Standard Grade

Epoxy Ester Resin

300

30

40

50

60

70

80

L Grade

Silicone Resin

400

N/A

40L

N/A

60L

N/A

N/A

 

Principle Dimensions

 

All disposable filter elements have a part number arranged with three figures, e.g. 25-64-70C. The first part refers to the inside diameter, the second figure refers to the overall length and the third part refers to the grade designation. Replace the ‘XX’ in the part numbers with the grade designation. Please enquire with specific requirements.

 

Standard Sizes

12-25-xx

38-58-xx

12-32-xx

38-152-xx

12-57-xx

45-127-xx

25-51-xx

51-89-xx

25-64-xx

51-230-xx

25-127-xx

51-476-xx

25-178-xx

63-762-xx

Special sizes available

Inside Diameters:

0.27” to 3.94” (7mm to 100mm)

Lengths:

.394” to 39.4” (10mm to 1000mm)

 

Example Part Number: 25-178-70C

I.D. (mm)

Length (mm)

Grade

25

178

70C

 
Home   |   Compressed Air and Gas   |   Analyzer Filters   |   Membrane Separators   |   Liquid Filters   |   Vacuum Pump Filters   |   Contact Us

© 2008 United Filtration Systems, Inc. 6558 Diplomat Drive, Sterling Heights, MI 48314
T: (586) 802-5561      F: (586) 802-5562